|
| |
|
 Speedometers
Bourbon type speedometer with readings in M.P.H.
and Km/h. Includes vinyl tube, plus all installation instructions
and hardware. The pitot tube must be ordered separately.
| Part Number |
Description |
|
|
| 34100-92E00 |
80 mph |
3 3/8" Diameter |
|
| 34100-92E10 |
50 mph |
3 3/8" Diameter |
|
| 34190-87D00 |
Pitot Tube |
|
|
| Easy to read white face
60 MPH 4" Speedometer. Requires toolkit listed below. |
 |
| Part Number |
Description |
|
|
| 99105-80102 |
60 mph |
4" Diameter |
|
| 99105-80009 |
Speedometer Tubing |
|
|
| Easy to read 65 MPH 4"
Speedometer. Requires toolkit listed below.
|
 |
| Part Number |
Description |
|
|
| 99105-80002 |
60 mph |
4" Diameter |
|
| 99105-80009 |
Speedometer Tubing |
|
|
|
|
 Tachometer
and Monitor Gauge Full scale 7000 R.P.M.
Tachometer an be used on all electric start models by using 4,
6 or 12 pole switch on rear of meter. Lead wire, mounting hardware
and instructions included. Monitor functions include: Low Oil
Pressure Warning, Engine Temperature Warning, Check Engine Warning
and Over-Rev Limit Warning.
| Part Number |
Description |
Application |
|
| 34200-92E02 |
3 3/8" Diameter |
DT25 and larger |
|
| These 4" 7,000 max
R.P.M. Tachs are available with or without 4-Stroke monitor
functions. Monitor functions include: Low Oil Pressure Warning,
Engine Temperature Warning, Check Engine Warning and Over-Rev
Limit Warning. |
 |
| Part Number |
Description |
Application |
|
| 99105-80100 |
Without Monitor Functions |
4" Diameter |
|
| 99105-80101 |
With Monitor Functions For
4-Stroke Motors |
4" Diameter |
|
| These 4" 7,000 max
R.P.M. Tachs are available with or without 4-Stroke monitor
functions. Monitor functions include: Low Oil Pressure Warning,
Engine Temperature Warning, Check Engine Warning and Over-Rev
Limit Warning. |
 |
| Part Number |
Description |
Application |
|
| 99105-80000 |
Without Monitor Functions |
4" Diameter |
|
| 99105-80001 |
With Monitor Functions For
4-Stroke Motors |
4" Diameter |
|
|
|
 Monitor
Gauge Monitor System Gauge provides your
engine oil level, cooling system, oil flow and rev-limiter indications.
2 1/16" diameter.
| Part Number |
Application |
Years |
|
| 341701-92X50 |
DT Models 1987 and newer except
the following |
|
|
|
DT35/40/75/85 |
1985 - 1986 |
|
|
|
DT55/65/115/140 |
1985 - 1987 |
|
|
|
DT150/200 |
1986 |
|
| Note |
|
| 36664-87D00 |
Grommet is required for 1989-2003
V4 and V6 |
|
| 36660-92E20 |
Harness 21' long |
|
| 36660-92E90 |
Harness extension 6' long |
|
| 2" Monitor Gauge
for 4-stroke engines help alert you to low oil pressure,
high engine temperature and engine over-rev. |
 |
| Part Number |
Description |
Application |
|
| 99105-80108 |
2" Diameter |
4-Strokes |
|
| 2" Monitor Gauge
for 4-stroke engines help alert you to low oil pressure,
high engine temperature and engine over-rev. |
 |
| Part Number |
Description |
Application |
|
| 99105-80008 |
2" Diameter |
4-Strokes |
|
|
|
 Fuel
Gauge Operates on 12 volts with magnetically
damped needle. This unit works with most fuel tank sending units.
| Part Number |
Description |
|
|
| 34300-92E00 |
2 1/16" Diameter |
With Harness |
|
| 34320-92E00 |
2 1/16" Diameter |
No Harness |
|
| Lack of fuel can ruin
your boating experience. This 2" Fuel Gauge can help
you monitor fuel level. Connects easily using your boat's
fuel sending unit harness. |
 |
| Part Number |
Description |
|
|
| 99105-80103 |
2" Diameter |
|
|
| Lack of fuel can ruin
your boating experience. This 2" Fuel Gauge can help
you monitor fuel level. Connects easily using your boat's
fuel sending unit harness. |
 |
| Part Number |
Description |
|
|
| 99105-80003 |
2" Diameter |
|
|
|
|
|  Voltmeter
Monitors your charging system. Harness and mounting
hardware included.
| Part Number |
Description |
|
|
| 34600-92E00 |
2 1/16" Diameter |
|
|
| Proper battery voltage
is necessary for your Suzuki motor to run at its best. Battery
voltage is monitored by this 2" Voltmeter. |
 |
| Part Number |
Description |
|
|
| 99105-80106 |
2" Diameter |
|
|
| Proper battery voltage
is necessary for your Suzuki motor to run at its best. Battery
voltage is monitored by this 2" Voltmeter. |
 |
| Part Number |
Description |
|
|
| 99105-80106 |
2" Diameter |
|
|
|
|
|  Hour
Meter
This 12 volt electric motor driven meter indicates
the number of hours your outboard motor has been operated to indicate
when periodic services are necessary.
| Part Number |
Description |
|
|
| 34500-92E00 |
2 1/16" Diameter |
|
|
| Handy Hour Meter helps
you keep track of the time between services. |
 |
| Part Number |
Description |
|
|
| 99105-80107 |
2" Diameter |
|
|
| Handy Hour Meter helps
you keep track of the time between services. |
 |
| Part Number |
Description |
|
|
| 99105-80007 |
2" Diameter |
|
|
|
|
|  Trim
Meter
Magnetic type gauge shows trim angle for optimum
performance and efficiency. 2 1/16" diameter. Must be used
with sender unit. Check the cart below or microfiche for appropriate
model.
| Part Number |
Description |
Wire |
Years |
|
| 34800-92E00 |
DT Models |
4 |
All |
|
| 34800-90J01 |
DF90/115 |
2 |
2001-2002 |
|
|
|
DF25 and up |
2 |
2002-2003 |
|
| To help maintain steering
stability and good performance, proper trim angle is essential.
The 2" Trim Gauge helps you monitor the trim angle.
For use with 2 wire senders. |
 |
| Part Number |
Description |
|
|
| 99105-80105 |
2" Diameter |
2-Wire Sender |
|
| To help maintain steering
stability and good performance, proper trim angle is essential.
The 2" Trim Gauge helps you monitor the trim angle.
For use with 2 wire senders. |
 |
| Part Number |
Description |
|
|
| 99105-80005 |
2" Diameter |
2-Wire Sender |
|
Water Pressure Gauge
| Bourbon-type gauge with
scale that measures cooling water pressure . Instructions
and installation hardware included. |
 |
 |
| Part Number |
Description |
|
|
| 34650-92E00 |
2 1/16" Diameter |
With Harness |
|
| 34320-92E00 |
2 1/16" Diameter |
Without Harness |
|
| 2" mechanical Water
Pressure Gauge includes necessary hardware. |
 |
| Part Number |
Description |
|
|
| 99105-80104 |
2" Diameter |
0-30 psi |
|
| 2" mechanical Water
Pressure Gauge includes necessary hardware. |
 |
| Part Number |
Description |
|
|
| 99105-80004 |
2" Diameter |
0-30 psi |
|
|
